Belar: "When accuracy counts, count on Belar"



The Belar PWM-1 Peak Weighting Module is an option (consisting of a circuit board with a rear-panel rotary switch) that adds peak weighting to the Peak Mod and 100% peak lights of the Belar TVM-100 or TVM-101 TV Aural Modulation Monitor.

Peak weighting is a method for allowing brief modulation peaks to be ignored by your monitor. This will generally result in your monitor indicating a lower peak modulation for a given modulation level.

The PWM-1 Peak Weighting Module can be set to ignore peaks shorter than 3, 5, 9, 15, and 20 cycles (of a 10 kHz burst) as well as Bypass (no peak weighting). The setting is easily changed by turning a rotary switch mounted on the back panel of the monitor.

The PWM-1 can ordered with your new TVM-100 or TVM-101, or it can be retrofitted to the TVM-100 or TVM-101 you already own. (It will not work with the older TVM-1 monitor.) You can add this module yourself, or you can have it installed by Belar. Please contact Belar for more details. If you already own a TVM-100 or TVM-101, make sure you provide us with the serial number when you contact us.

© Copyright 2000 Belar Electronics Laboratory, Inc. All rights reserved. Specifications subject to change without prior notice.

What's New | About Us | AM Equipment | FM Equipment | TV Equipment | Service & Support