LP-1A AM AMPLIFIED LOOP ANTENNA
Description
The LP-1A has a amplifier mounted in the loop frame to compensate for low signal strength. This loop can be tuned to a specific frequncy or wideband. The output voltage of the LP-1A is approximately equal to the field strength.
The LP-1A requires a +12 volt phantom power supply for powering the internal amplifer. A LP-1A Option 01 external power supply is required when not used used with the Belar RFA-2 or Belar AMDA-1.
Features
- Reduces Electrostatic Noise by using Natural Directional Receiving.
- Off-Axis Interference from other stations can be minimized by rotating the Antenna.
- Frequency Tuned Version: 530kHz to 1710kHz specified when ordring.
- Wide-band Version: Wide(530kHz to 1710kHz)
Specifications
Model LP-1 Shielded Loop Antenna
- Frequency Range
- 530 kHz to 1710 kHz in 3 Bands
- Receiving Band
-
Tuned(Specified): 530-1710 kHz
Wide Band: 530-1710 kHz - Diameter
- 32"
- Mounting
- 1/2" NPT
- Connector
- BNC
- Output Voltage
- Equal to Field Strength
- Attenuation
- 0 dB
- Permissible Wind Load
-
150 mph
100 mph with 3/4" Ice
Packaging
- Net Weight
- 3½ lbs
- Shipping Weight
- 7 lbs
- Shipping Carton Size
- 36" × 36" × 2" (91.44 × 91.44 × 5.08 cm)
Note: Specify receiving band when ordering.
Downloads
Operator Manual
Complete operating instructions, setup information, controls, connections, and technical information for the LP-1.
View Manual →