Belar FMRR-4 Frequency Agile FM Rebroadcast Receiver

BELAR FMRR-4 FREQUENCY AGILE FM REBROADCAST RECEIVER

DESCRIPTION

The Belar FMRR-4 Frequency Agile FM Rebroadcast Receiver is a microprocessor controlled, tunable receiver designed for rebroadcasting and other applications that require accurate FM reception and composite output. The FMRR-4 features 10 memory locations for one-button access to 10 stations with call letters. Direct dial of any standard FM frequency is also possible, and UP/DOWN buttons are included. The station's call letters can be programmed into the display with the frequency for quick and easy reference. A sophisticated, multistage filter ensures the highest possible performance.

The precision demodulator features two buffered 75 ohm composite (BNC) outputs and a 600 ohm, balanced (XLR) output suitable for rebroadcast of mono, stereo, and SCA signals.

FEATURES

10 memory presets with programmable call letters
Direct dial of any standard FM frequency in 50 kHz increments
Non-volatile memory for presets, calls
Input Attenuator: 0, 6, 12, 18 dB, switched
Automatic Gain Control (AGC)
Carrier-fail relay (NO or NC) for remote switching applications
Audio mute under low- or loss-of-signal
Front panel headphone jack for convenient monitoring
Optional power supplies available for solar or other special applications

SPECIFICATIONS

RF Input Sensitivity 			100 uv

Signal-to-Noise Ratio:

 100 uV input 				75 dB

 500 uv input 				85 dB

RF Input Impedance			75 ohms, BNC Connector

Input Attenuator 			0, 6, 12, 18 dB

RF Frequency Range 			87.75 - 107.95 MHz in 50 kHz increments

Outputs 				two 75 ohm buffered composite (BNC)
                                        600 ohm, balanced (XLR)

Capture Ratio 				1.5 dB

Selectivity:

 Alternate Channel 			27 dB

 3rd Adjacent Channel 			46 dB

Harmonic Distortion 			less than 0.03% @ 1 kHz, 75 kHz deviation 

Separation                              1 kHz 60 dB, 15 kHz 50 dB

Dimensions 				1 EIA Rack Unit 1.75"H x 14.5"D x 19"W

Power Requirements 			110/220 VAC, 50/60 Hz

Power Consumption 			20 VA
   optional power supplies available

Shipping Weight 			11 lbs